Kitajska MG-090F bronaste prirobnične puše, specifikacije in tolerance, dobavitelj, proizvajalec, tovarna, ki lahko zagotovi ne samo visoko zmogljive izdelke, ampak tudi storitve na visoki ravni, kot so izbira materiala, simulacijski test, inženirsko načrtovanje in namestitev.

MG-090F Bronaste prirobnične puše Specifikacije in tolerance

domov >> Katalogi >> Nekovinski samomazalni ležaji >> MG-090F Bronaste prirobnične puše Specifikacije in tolerance

◆ Introduction

MG-090 bronze self-lubricating bearings use a kind of high density bronze alloy of special compositions as backing, the surface of alloy is rolled with diamond pattern of the oil indents or half ball oil indents, this kind of bearing has a higher density, a higher load capacity and a better anti-wear resistant performance. It has been widely used in many fields such as hoist machine, building machinery, machine tool industry and mining machinery.

◆ Chemica Composition

Chemica Composition
Material	Cu %	Sn %	P %
CuSn8	Rest	7.0～9.0	0.03～0.45

◆Technical Data

Technical Data
	MG-090 Bronze Wrapped Bushing	MG-090T Bronze Wrapped Bushing	MG-09G Bronze +Graphite Wrapped Bushing	MG-H68 Copper Wrapped Bushing
Data
Density	8.9g/cm³	8.9g/cm³	8.3g/cm³	8.4g/cm³
Pressure resistance strength	470N/mm	470N/mm	470N/mm	440N/mm
Coecient of heat conduction	60W/m.k	60W/m.k	58W/m.k	71W/m.k
Linear expansion coecient	18.5×10 /K	18.5×10 /K	18.5×10 /K	19.2×10/K
Hardness	90~120 HB	90~120 HB	90~120 HB	80~110 HB
Elongation	0.55	0.55	0.55	0.3
Alloy material	CuSn8P	CuSn8P	CuSn8P	CuZn31Si
Other material	CuSn6.5P	CuSn6.5P	CuSn6.5P

Prenesi katalog

Select	Inquiry	Length	Di φd	DO φD	D
15	20	25	30	35	40	50	60	70	80	90
		MG 25150	MG 25200	MG 25250	-	-	-	-	-	-	-	-	25	28	35
		-	MG 30200	MG 30250	MG 30300	-	-	-	-	-	-	-	30	34	45
		-	MG 35200	MG 35250	MG 35300	MG 35350		-	-	-	-	-	35	39	50
		-	-	MG 40250	MG 40300	MG 40350	MG 40400	-	-	-	-	-	40	44	55
		-	-	-	MG 45300	MG 40350	MG 40400	MG 40500	-	-	-	-	45	50	60
		-	-	-	MG 50300	MG 50350	MG 50400	MG 50500	-	-	-	-	50	55	65
		-	-	-	MG 55300	MG 55350	MG 55400	MG 55500	-	-	-	-	55	60	70
		-	-	-	MG 60300	MG 60350	MG 60400	MG 60500	MG 60600	-	-	-	60	65	75
		-	-	-	MG 65300	MG 65350	MG 65400	MG 65500	MG 65600	-	-	-	65	70	80
		-	-	-	-	MG 70350	MG 70400	MG 70500	MG 70600	MG 70700	-	-	70	75	85
		-	-	-	-	MG 75350	MG 75400	MG 75500	MG 75600	MG 75700	-	-	75	80	90
		-	-	-	-	MG 80350	MG 80400	MG 80500	MG 80600	MG 80700	MG 80800	-	80	85	100
		-	-	-	-	-	-	MG 90500	MG 90600	MG 90700	MG 90800	MG 90900	90	95	110
		-	-	-	-	-	-	MG 100500	MG 100600	MG 100700	MG 100800	MG 100900	100	105	120
		-	-	-	-	-	-	MG 110500	MG 110600	MG 110700	MG 110800	MG 110900	110	115	130
		-	-	-	-	-	-	MG 120500	MG 120600	MG 120700	MG 120800	MG 120900	120	125	140
		-	-	-	-	-	-	-	MG 130600	MG 130700	MG 130800	MG 130900	130	135	155
		-	-	-	-	-	-	-	MG 140600	MG 140700	MG 140800	MG 140900	140	145	165
		-	-	-	-	-	-	-	MG 150600	MG 150700	MG 150800	MG 150900	150	155	180
		-	-	-	-	-	-	-	MG 160600	MG 160700	MG 160800	MG 160900	160	165	190
Nazaj12 Naprej