-,-,-,-,-,-,-,-,-,-,MG-2 2030,MG-2 2025,MG-2 2020,MG-2 2015,-
Hot Tags: ležaji epb, Kitajska, proizvajalci, dobavitelji, tovarna, trgovina na debelo, po meri, nakup, cenik, cenik, na zalogi, brezplačen vzorec, puše hidravličnega drsnega ležaja, ležaji epb, samomazalni ležaji z žarilno nitko, ležaji iz jekla z vlakneno tkanino, robne puše pb, cilindrične puše pb
Specifikacije in toleranca za cilindrične puše MG-2Y
◆ Introduction:
MG-2Y can work for a long time without oil in the condition of prelubricated with lubrication indents design. It is widely applied in metallurgy machinery, mining machinery, water conservancy machinery, automobile, building machinery, agriculture machinery, rolling steel industry etc.
◆ Material Structure
1. POM with fiber 0.3~0.5mm
2. Porous bronze 0.2~0.35mm
3. Steel backing 0.4~2.2mm
4. Plated coating: Tin plating 0.005mm or Copper plating 0.008mm
◆Technical Data
| Technical Data | |
| Max.load | Static：250N/mm2 |
| Very low speed：140N/mm | |
| Roatating oscillating： 70N/mm | |
| Max. PV (dry running) | 3N/mm ·m/s |
| Temp. limit | -40℃~+110℃ |
| Friction coenncient | 0.05~0.20 |
| Max. speed | Grease Lubrication: 2m/s |
| Oil continued to >2m/s | |
| Thermal conductivity | 50 W(m·k)-1 |
| Coenncient of thermal expansion | 11×10 ·K |
| Initial pre-lubrication at assembly is strongly recommended | |
Dimension and Parameters
Zahtevaj ponudbo
- Length
-
10 :-
-
15 :MG-2 2015
-
20 :MG-2 2020
-
25 :MG-2 2025
-
30 :MG-2 2030
-
40 :-
-
50 :-
-
60 :-
-
80 :-
-
90 :-
-
95 :-
-
100 :-
-
110 :-
-
120 :-
-
Shaft(f7) (mm) :-
-
Tolerance :20
-
Housing (H7) :-0.033
-
Tolerance :23
-
OD :+0.021
-
Tolerance :23
-
ID After fixed Di,a :+0.075 +0.035
-
Clearance DD :20.131 20.050
-
Wall thick- ness S3 :0.164 0.050
-
Oil hole dL :1.475 1.445
Related product
